Aluminum Alloy Bolts: Lightweight Fastening

Published: 2026-10-13

Driven by the "dual carbon" goals, lightweighting has become a core imperative across the automotive, aerospace, and consumer electronics industries. As critical components for fastening connections, the material innovation of bolts is quietly reshaping the industry landscape. With over two decades of deep expertise in precision fasteners, Yongjing Precision (parent company: Yingfeng Zhichengjia) has achieved a series of breakthroughs in the R&D and manufacturing of high-strength aluminum alloy bolts, offering customers total cost optimization solutions from design to after-sales service.

Traditional steel bolts have a density of approximately 7.85 g/cm³, while aluminum alloy bolts have a density of only about 2.7 g/cm³, achieving weight reduction of over 60%. This advantage is particularly prominent in the new energy vehicle sector—lighter fasteners mean lower overall vehicle weight and extended driving range.

Beyond lightweighting, aluminum alloy bolts address another industry pain point: galvanic corrosion. When steel bolts are used to connect magnesium or aluminum alloy components, the significant potential difference makes them highly susceptible to galvanic corrosion. In contrast, aluminum alloy bolts have a potential close to that of magnesium/aluminum components, effectively mitigating this issue. According to the principle of galvanic corrosion, the greater the potential difference between two metals, the stronger the corrosion tendency.

[Image]

Yongjing Precision's high-strength aluminum alloy bolts are developed in reference to the Volkswagen Group standard VW60469, utilizing the AW6056 (AlSiMgCuMn) alloy grade. Through material optimization, they achieve an ultimate tensile strength of 630 MPa and a yield strength of 500 MPa. Test data shows that the ZT68 material delivers a stable ultimate tensile strength of approximately 630 MPa, a yield strength of around 500 MPa, and an elongation at break of ≥6%.

This performance level means that aluminum alloy bolts can already meet the stringent strength requirements of automotive powertrain systems.

Traditional aluminum alloy fasteners are often manufactured using CNC machining, which suffers from low material utilization and efficiency. Yongjing Precision pioneered the mass production of high-strength aluminum alloy bolts via the cold heading process in China. The advantages of cold heading include:

As General Manager Xu Chaokui stated: "This process is a domestic first. Products made through cold heading offer high strength, high production efficiency, material savings, and one-step forming."

The performance of aluminum alloy bolts relies on precise heat treatment control. Solution treatment (480–530°C) fully dissolves alloying elements into the aluminum matrix, followed by aging treatment at 150–200°C to precipitate finely dispersed strengthening phases—this is the key to achieving high strength.

It is particularly worth emphasizing that Yongjing Precision requires thread rolling to be performed after heat treatment, rather than before. The advantages of this process sequence are:

Improved mechanical properties of the threads

Reduced susceptibility to intergranular corrosion

Formation of compressive residual stress in the thread root, enhancing fatigue strength

Reduced risk of thread damage

Due to the material properties of aluminum alloys, when aluminum bolts are used in magnesium/aluminum components, the engagement length required is only 1.3–1.5d (where d is the nominal thread diameter), whereas steel bolts typically require 2–3d. Shorter engagement length means a more compact design envelope and lighter structural weight.

Yongjing Precision conducted systematic performance tests on ZT68 aluminum alloy bolts:

After 150°C × 6h thermal exposure: 97.1% retention

After 150°C × 8h thermal exposure: 96.3% retention

After 150°C × 12h thermal exposure: 95.5% retention

Currently, Yongjing Precision's high-strength aluminum alloy bolts have entered the supply chains of leading new energy vehicle manufacturers including BYD, Geely, and CATL, with orders remaining at full capacity and shipment volume growing 30% year-over-year. The company has accumulated 26 authorized patents and holds over 20% of the domestic market share for precision electronic fasteners.

The company has also established industry-university-research partnerships with Shenzhen University, Southern University of Science and Technology, Sun Yat-sen University, and other institutions, with annual R&D investment exceeding 10 million RMB, continuously driving the iterative advancement of high-strength aluminum alloy materials.

Yongjing Precision's parent company, Yingfeng Zhichengjia, has proposed the "15-85 Rule" —the procurement cost of fasteners accounts for only 15% of the total lifecycle cost, while 85% of costs come from hidden elements such as design, supplier selection, logistics, warehousing, inspection, pre-assembly, assembly, and after-sales service.

Therefore, what we offer our customers is not just a product, but a comprehensive total cost optimization service from prototype design to after-sales, including: