135-6073-0094
PRODUCT CENTER
Thread Inserts
Key-locking thread insert with keys driven into the base mat
Product Center · Thread Inserts
Key-Locking Thread Insert
Key-locking thread insert with keys driven into the base material to stop rotation.
Key specifications
- MaterialSUS304 Stainless Steel
- StandardGB/T 24425.1
- Wire tensile strength≥1370 MPa
- HardnessHV 380–450
Product overviewOverview
The keys must all reach the same depth. A shallow key stays proud and does nothing; an over-driven key can split a thin wall, so the matching setting tool and stroke are part of the specification.
Material: SUS304 Stainless Steel.
Key featuresFeatures
- Suitable for aluminium and other low-strength bases.
- Coaxial internal and external threads.
- Matching setting tool controls key depth.
- Carbon steel with zinc plating, or stainless.
Typical applicationsApplications
- Wind energy components
- Aluminium structural joints
- Heavy equipment
Selection notesSelection
Use the dedicated tool, since a generic driver cannot control key depth.
Frequently asked questionsFAQ
How do I specify the Key-Locking Thread Insert?
Use the dedicated tool, since a generic driver cannot control key depth. Material: SUS304 Stainless Steel.
What matters during installation of the Key-Locking Thread Insert?
Install per drawing. Verify the mating hole against the this range range before the first article, then set the batch parameters.
Specifications
| Standard | GB/T 24425.1 |
|---|---|
| Material | SUS304 Stainless Steel |
| Wire tensile strength | ≥1370 MPa (work-hardened condition) |
| Hardness | HV 380–450 (wire section, indicative) |
Manufacturing and inspection
Key slot and key clearance sampled; both threads gauged.We recommend a pilot assembly at the actual torque and mating part before locking the process parameters for volume.
