135-6073-0094
PRODUCT CENTER
Riveting Products
Pull-through rivet that anchors in thin sheet with a wide ba
Product Center · Riveting Series
Pull-Through Rivet
Pull-through rivet that anchors in thin sheet with a wide back-side footprint.
Key specifications
- MaterialCarbon Steel / Stainless Steel (customizable)
- StandardGB/T 90.1, customer drawing
Product overviewOverview
In very thin or soft panels, a standard blind rivet can pull through the sheet before the mandrel breaks. A pull-through design enlarges the back-side bearing area, spreading the clamp load over more material so the panel survives setting and service loads.
Material: Carbon Steel / Stainless Steel (customizable).
Key featuresFeatures
- Mandrel breaks cleanly, leaving no sharp protrusion at the front.
- Steel or stainless bodies for shear demand.
- Head styles to suit visible and hidden faces.
- Enlarged back-side bearing area prevents pull-through in thin sheet.
Typical applicationsApplications
- Appliance wrappers
- Signage and display backs
- Thin aluminium panels
Selection notesSelection
Check clearance behind the panel for the larger back-side footprint.
Frequently asked questionsFAQ
How do I specify the Pull-Through Rivet?
Check clearance behind the panel for the larger back-side footprint. Material: Carbon Steel / Stainless Steel (customizable).
What matters during installation of the Pull-Through Rivet?
Break the tang after the insert is seated and retrieve it — a tang left in the bore blocks the bolt and cannot be seen from above Mandrel breaks cleanly, leaving no sharp protrusion at the front.
Specifications
| Material | Carbon Steel / Stainless Steel (customizable) |
|---|---|
| Standard | GB/T 90.1, customer drawing |
Manufacturing and inspection
Body and bearing dimensions sampled per lot.We recommend a pilot assembly at the actual torque and mating part before locking the process parameters for volume.
