135-6073-0094
PRODUCT CENTER
Riveting Products
Flush-head blind rivet with an enlarged back bearing area fo
Product Center · Riveting Series
Pull-through countersunk rivet
Flush-head blind rivet with an enlarged back bearing area for thin panels.
Key specifications
- MaterialCarbon Steel / Stainless Steel (customizable)
- StandardGB/T 90.1, customer drawing
- Head stylecountersunk 90°
Product overviewOverview
The countersink must match the head angle. A mismatched cone leaves the head proud or creates line contact that deforms the panel as the mandrel pulls.
Material: Carbon Steel / Stainless Steel (customizable).
Key featuresFeatures
- Head angle matched to the countersink tool.
- Countersunk head seats flush in a matching cone.
- Enlarged back bearing area for thin panels.
- Clean mandrel break at the front face.
Typical applicationsApplications
- Display frames
- Exterior panels
- Appliance doors
Selection notesSelection
Confirm back-side clearance for the bearing footprint.
Frequently asked questionsFAQ
How do I specify the Pull-through countersunk rivet?
Confirm back-side clearance for the bearing footprint. Material: Carbon Steel / Stainless Steel (customizable).
What matters during installation of the Pull-through countersunk rivet?
Fit is what matters: install per drawing, after checking that the hole and sheet thickness fall inside the this range range for this page.
Specifications
| Material | Carbon Steel / Stainless Steel (customizable) |
|---|---|
| Standard | GB/T 90.1, customer drawing |
| Head style | countersunk 90° |
Manufacturing and inspection
Flushness checked after setting in a sample panel.Alternative materials and finishes can be quoted side by side during sampling, so cost and corrosion resistance can be traded off explicitly.
