135-6073-0094
PRODUCT CENTER
Riveting Products
Flush-fit hex rivet nut: the hexagonal body locates in a sha
Flush-Fit Hex Rivet Nut
- MaterialCarbon Steel / Stainless Steel
- Installationset from one side with a rivet-nut tool
- StandardGB/T 17880.1–.4 (blind rivet nuts)
- Typical substratesheet 0.5–3 mm, extrusions, castings
- Key inspectionsbulge formation, thread gauging, setting load
Product overviewOverview
Joint reliability depends on the contact area between bulge and hole wall, the bearing area of the flange, and the strength of the sheet itself. A hex body in a hex hole carries torque on the flats, which is more reliable than knurling in soft or thin sheet. The flush finish means the nut sits level with the surface, so the panel face stays usable and the nut cannot be gripped from outside.
Material: Carbon Steel / Stainless Steel. It is set from one side with a rivet-nut tool.
Key featuresFeatures
- Hex body in a hex hole takes torque on the flats.
- Zinc-plated carbon steel or 304/316 stainless, chosen to the environment.
- Grip range and hole size must match the size table; an oversized hole reduces clamp.
- Single-side installation with a back-side bulge, suited to closed sections.
Typical applicationsApplications
- Enclosures and sheet-metal cabinets
- Automotive body and chassis attachments
- Rail interior and equipment brackets
Selection notesSelection
The hole has to be formed to the hex; in a round hole the body has no flats to react against and the anti-rotation benefit disappears.
Frequently asked questionsFAQ
Does a flush hex nut need a shaped hole?
What matters during installation of the Flush-Fit Hex Rivet Nut?
| Material | Carbon Steel / Stainless Steel |
|---|---|
| Type | Rivet nut |
| Standard | GB/T 17880.1–.4 (blind rivet nuts) |
| Head style | hex head |
| Installation | set from one side with a rivet-nut tool |
| Typical substrate | sheet 0.5–3 mm, extrusions, castings |
| Key inspections | bulge formation, thread gauging, setting load |
Coating thickness follows GB/T 5267.1 and salt spray GB/T 10125.Material certificates and dimensional records accompany each lot; material and dimensional records are supplied per batch.
