135-6073-0094
PRODUCT CENTER
SMT Fasteners
Tape-and-reel packing to EIA-481, with pocket geometry and o
Product Center · Tape & Reel Packaging
SMT Tape-and-Reel Packaging
Tape-and-reel packing to EIA-481, with pocket geometry and orientation set for stable picking.
Key specifications
- MaterialSUS304 Stainless Steel
- Installationfed from carrier tape on a placement machine
- StandardEIA-481 (carrier tape and reeling)
- Typical substrateSMT component packing
- Key inspectionspocket dimensions, peel force, orientation
Product overviewOverview
The critical elements are pocket geometry and orientation. Pocket size sets how precisely the part sits in the tape; too large and the part shifts, so the nozzle picks off-centre; too small and the part cannot seat fully, leading to crushing or a missed pick.
Material: SUS304 Stainless Steel. It is fed from carrier tape on the placement machine.
Key featuresFeatures
- Pockets made to the part outline for precise location and fewer pick errors.
- Consistent orientation and polarity matching the placement program.
- Cover-tape peel force controlled to EIA-481 to prevent part lift or spillage.
- PS or PC carrier material; PC withstands multiple reflow passes.
Typical applicationsApplications
- SMT nuts and studs
- Spacer plates and terminals
- Precision hardware packing
Selection notesSelection
Pocket depth trades pick speed against stability: deep pockets locate well but lengthen nozzle travel.
Frequently asked questionsFAQ
How do I specify the SMT Tape-and-Reel Packaging?
Pocket depth trades pick speed against stability: deep pockets locate well but lengthen nozzle travel. Material: SUS304 Stainless Steel. It is fed from carrier tape on the placement machine.
What matters during installation of the SMT Tape-and-Reel Packaging?
Feed it from carrier tape on the placement machine. Pockets made to the part outline for precise location and fewer pick errors.
Specifications
| Material | SUS304 Stainless Steel |
|---|---|
| Packaging | Tape & Reel |
| Standard | EIA-481 (carrier tape and reeling) |
| Installation | fed from carrier tape on a placement machine |
| Typical substrate | SMT component packing |
| Key inspections | pocket dimensions, peel force, orientation |
Manufacturing and inspection
Pocket dimensions and position are sampled to EIA-481 optically.We recommend a pilot assembly at the actual torque and mating part before locking the process parameters for volume.
